User Manual
72_0103_003
10 December 2002
©
2002 Itronix Corporation. All rights reserved.
Peripheral Setup
Settings on this page allow you to change port configurations.
GoBook II™ Help
Field Setting Function
Internal
MDC
Modem
Auto
Disabled
Default is disabled.
Onboard
Serial
Port A &
B
Auto COM 1 is assigned to the serial port
located at the rear of your GoBook
II. Set this field to Auto to enable
the system to automatically assign an
I/O address and interrupt to the port.
Disabled Disables COM 1. You may need to
remove this port in Windows to
release the IRQ resource for use by
other devices.
3F8/COM1 Default address and COM port
setting.
Pa
g
e41of73GoBook II Hel
p
7/21/2003file://C:\Documents%20and%20Settin
g
s\harwoodm.ITRXNT1\Local%20Settin
g
s\Tem
p
\~hh20C9.ht
m