User's Manual

1. Locate the 15-pin VGA monitor port on the back of the unit behind the IO door. Then connect the video signal

cable from the external monitor to the monitor port.

2. Connect the monitor’s power cable to a power outlet and turn on the monitor.

3. If the new monitor has not automatically been detected and is not displaying what appears on your GoBook II’s

LCD screen, open the Control Panel.

4. Double-tap Display. The Display Properties window opens.

5. Tap the Settings tab. Then select the Advanced button.

6. Tap the S3DuoVue tab and select the CRT box the enable display on an external monitor.

7. You can also use the FN +F2 hot keys to cycle through the CRT, LCD, and CRT//LCD settings.

72_0103_003

10 December 2002

Disk Drives

Your computer comes with several components for reading and writing (recording) information.

The Hard Disk Drive

The hard disk

provides high-capacity storage and fast access. Windows and most programs are stored here. Your

GoBook II identifies the hard disk drive as drive C. For information about removing or installing the hard drive see

Hard Drive Care and Handling.

The Floppy Disk, CD-ROM, or DVD-ROM Drive

Your computer may come with a floppy disk drive. The floppy disk drive accepts 3.5-inch floppy disks and is read and

write capable.

The CD-ROM drive is a read only drive. It cannot be used to write data to a recordable compact disk. The CD-ROM

drive can read data from CDs, including audio or video CDs. The DVD drive can read both DVD and CD disks. Your

GoBook II identifies the drive with the letter following the hard drive letter. If you hard drive is C, then the CD0-ROM

drive will be D. The media ba

is located on the ri

ht side of

our com

uter, as

ou are facin

the dis

, and is

GoBook II™ Hel

e 19 of 74GoBook II Hel

12/19/2003file://C:\Documents%20and%20Settin

s\harwoodm.ITRXNT1\Local%20Settin

s\Tem

\~hhB7F4.htm