User's Manual

The system does not recognize the PC Card CD-ROM when it is inserted into the PC Card socket

✁

There is a delay of 10 to 15 seconds before the CD-ROM drive is recognized.

✁

Drivers may not be installed. Contact your organization’s help desk for assistance.

The computer locks up when I remove the PC card

✁

Before you remove the card, select the PC card icon on the taskbar (in the tray area near the clock

in the lower right corner), and choose “Stop [card name] card.”

The computer locks up when inserting a PC card

✁

Because of the combination media bay configuration on the GoBook II, the computer may not be

locked up. Instead, it may be taking a couple of minutes before the system recognizes the PC card

slot.

72_0103_003

10 December 2002

Pen/Touch Screen

When I try to use the stylus on my touch screen, nothing happens

✁

If you cannot select objects accurately with the stylus, you may need to recalibrate the touch

screen.

To calibrate the touch screen

1. From the Start Menu, select Programs, Mobile Computer Tools and then choose Touch Screen

Calibrator. This opens the Calibration Applet.

2. Click on the Calibrate button.

3. After you have completed calibration by touching the highlighted points using an approved stylus,

select OK to have the new settings take effect.

Thetouchscreendis

war

sor

illows in hi

h humidit

GoBook II™ Help

e75of76GoBook II Hel

1/31/2003file://C:\Documents%20and%20Settin

s\harwoodm\Local%20Settin

s\Tem

\~hh35F9.htm