User's Manual

A command was entered that is spelled incorrectly or does not exist on the computer.

Invalid media type reading drive X (where X is any drive letter)

Abort, Retry, Fail?

The media may not be formatted. Press a to abort, then format the card using the MS-DOS Format

command, or from Windows using the Format Disk command.

Invalid drive specification

You tried to access a drive that does not exist. This can happen if you try to access drive D, but the

media is not loaded. Report this error to your supervisor or help desk.

Non-System disk or disk error

Replace and press any key when ready

This can occur if media is in the card socket and you restart the computer. Remove the media, and then

press any key.

Not ready reading drive X (where X is any drive letter)

Abort, Retry, Fail?

Make sure that the media is inserted fully into the card socket, then press r to retry.

72_0103_003

10 December 2002

Windows Messages

Windows messages are typically self-explanatory. (See

Troubleshooting, for more information).

Application Messages

Both

MS-DOS and Windows applications may display messages if a warning or error condition occurs.

Refer to the online Hel

or other documentation for the a

lication that

enerated the messa

GoBook II™ Help

e64of76GoBook II Hel

1/31/2003file://C:\Documents%20and%20Settin

s\harwoodm\Local%20Settin

s\Tem

\~hh35F9.htm