User's Manual

AdvancedCMOSSetup
GoBook II™ Help
Field Setting Function
Bootup
Sequence
C; A;
CDROM
Use this field to set the devices from which the system should boot in
order of priority. The default value is C; A; CDROM,. This means
the computer will attempt to boot from the hard disk drive (HDD),
then the floppy disk drive (FDD), then the CD-ROM.
A; C;
CDROM
the computer will boot from the FDD, then the HDD, then the CD-
ROM. The BIOS will auto detect a floppy disk in boot device A:
CDROM;
A; C;
The computer will boot from the CD-ROM, then the FDD, then the
HDD.
S.M.A.R.T.
for Hard
Disabled
Enabled
The S.M.A.R.T. (Self-Monitoring, Analysis, and Disks Reporting
Technology) system is a diagnostics technology that monitors and
predicts device performance. The disk drive software monitors the
internal performance of the motors, media, heads, and electronics of
the drive. Only S.M.A.R.T. Hard Disks are supported. The default is
Enabled.
Bootup Num-
Lock
Off
On
Use this field to initially disable the Num-Lock feature of the internal
keyboard when the GoBook II starts The default is Off.
Display
Expansion
Mode
Enabled
Disabled
If you are using DOS or a 640 x 480 resolution to run windows, the
display will not fill the entire screen. Enable this mode to expand the
display to the entire screen.
Password
Check
Setup The default value is Setup, which specifies that a password is only
required to enter the Setup Utility.
Always If Always is selected, the password is required when the system is
booted up or resuming from a suspend-to-disk.
Pa
g
e41of76GoBook II Hel
p
1/31/2003file://C:\Documents%20and%20Settin
g
s\harwoodm\Local%20Settin
g
s\Tem
p
\~hh35F9.htm