User's Manual

CAUTION

Before attempting to configure a hard disk drive, make sure you have the configuration

information supplied by the manufacturer of your hard drive. Incorrect settings can result in your

system not recognizing the installed hard disk.

72_0103_003

10 December 2002

AdvancedCMOSSetup

Mode 32Bit mode.

GoBook II™ Help

Field Setting Function

Bootup

Sequence

C; A;

CDROM

Use this field to set the devices from which the system should boot in

order of priority. The default value is C; A; CDROM,. This means

the computer will attempt to boot from the hard disk drive (HDD),

then the floppy disk drive (FDD), then the CD-ROM.

A; C;

CDROM

the computer will boot from the FDD, then the HDD, then the CD-

ROM. The BIOS will auto detect a floppy disk in boot device A:

CDROM;

A; C;

The computer will boot from the CD-ROM, then the FDD, then the

HDD.

S.M.A.R.T.

for Hard

Disabled

Enabled

The S.M.A.R.T. (Self-Monitoring, Analysis, and Disks Reporting

Technology) system is a diagnostics technology that monitors and

e41of76GoBook II Hel

4/28/2003file://C:\Documents%20and%20Settin

s\harwoodm.ITRXNT1\Local%20Settin

s\Tem

\~...