User's Manual

1. The

Cisco MPI350 MiniPCI slot

with two antennas in the display. The Cisco MiniPCI Card

User’s Manual may already be installed on your GoBook II computer. Refer to it for more

information.

2. A

PC Card Cisco 350 WLAN

in the CARMA slot of the computer. The Cisco PC Card User’s

Manual may already be installed on your GoBook II computer. Refer to it for more information.

72_0103_003

10 December 2002

Power Management

The GoBook II has power management capability so you can reduce the amount of energy used,

especially during periods of inactivity. Effective use of power management options can greatly

conserve and extend your battery life.

Battery Calibration

BIOS Level Battery Calibration

The first time you use a battery, you should calibrate it. The calibration process empties and charges the

battery. This allows the Windows battery gauge to accurately monitor battery status. To calibrate a

battery, follow these steps:

1. Plug in the AC adapter.

2. Restart the computer. When the startup screen appears, just prior to the Windows logo screen,

press the Del key to enter the BIOS Setup Utility.

3. At the "Choose the setup function" screen, select "Battery Calibration" and hit enter.

NOTE

Make sure the AC adapter and battery are present.

4. Choose Primary or secondary battery and hit enter. Battery Calibration will take from 10 to 16

hours, depending on how much power the battery may already contain.

Windows Batter

Calibration

GoBook II™ Help

e31of76GoBook II Hel

4/28/2003file://C:\Documents%20and%20Settin

s\harwoodm.ITRXNT1\Local%20Settin

s\Tem

\~...