User's Manual

Standard Feature Description
CAUTION
Incorrect settings can cause your system to malfunction. To correct mistakes, press
Esc
until you have
exited the Setup Utility.
Primar
y
/ Secondar
y
Master and Slave Settin
g
s
Field Setting Function
System
Time
Use these fields to set the time and date. The time is displayed in 24 hour
format. The date can be set from January 1, 1980 to December 31, 2099. The
values set in these two fields take effect immediately.
Floppy
Drive A
Not
Installed
1.44 MB (3
1/2")
Indicates if a floppy disk drive is installed. Default is 1.44 MB (3 1/2"). If this
field is set to "Not Installed" the system will not detect a floppy inserted in the
media bay.
Type Shows type of system installed including the following options:
- (Pri. Master) Auto, user, Not Installed
-(sec.Master)auto,ATAPICD-ROM,NotInstalled
Pri. Master Auto
User
Not
Installed
The default setting is Auto. Auto lets the system automatically read setup
information from the device.
Sec. Master Auto
ATAPI
CD-ROM
Not
Installed
The default setting is Auto. Auto lets the system automatically read setup
information from the device. When set to Auto, the BIOS will automatically
detect hard disk capacity.
System
Memory;
Extended
Memory
These fields display the amount of conventional memory and extended memory
detected by the system during boot up. They are display only fields.
Pa
g
e38of74GoBook II Hel
p
9/30/2003file://C:\Documents%20and%20Settin
g
s\harwoodm.ITRXNT1\Local%20Settin
g
s\Tem
p
\~hhDDD5.ht
m