User's Manual Part 1

PC Cards

I can’t remove the PC card

Press the ejector button located inside the PC card door on the side of the computer. The button will pop out. Press the ejector

button again to eject the PC card. Slide the card out.

If the ejector button malfunctions when you press it, release the button and then press it again.

Diskette Read Error

Any card in the PC Card socket except for a properly formatted memory card will cause this error since it is trying to read the PC

Card.

The system does not recognize the PC Card CD-ROM when it is inserted into the PC Card socket

There is a delay of 10 to 15 seconds before the CD-ROM drive is recognized.

Drivers may not be installed. Contact your organization’s help desk for assistance.

The computer locks up when I remove the PC card

Before you remove the card, select the PC card icon on the taskbar (in the tray area near the clock in the lower right corner), and

choose “Stop [card name] card.”

The computer locks up when inserting a PC card

Because of the combination media bay configuration on the GoBook II, the computer may not be locked up. Instead, it may be

taking a couple of minutes before the system recognizes the PC card slot.

72_0103_003

10 December 2002

Pen/Touch Screen

When I try to use the stylus on my touch screen, nothing happens

If you cannot select objects accurately with the stylus, you may need to recalibrate the touch screen.

To calibrate the touch screen

1. From the Start Menu, select Programs, Mobile Computer Tools and then choose Touch Screen Calibrator. This opens the

Calibration Applet.

2. Click on the Calibrate button.

3. After you have completed calibration by touching the highlighted points using an approved stylus, select OK to have the new

settings take effect.

The touch screen display warps or pillows in high humidity

The computer remains functional; however, moving the computer to a more suitable environment will allow the display to

recover.

The touch screen doesn't respond after a suspend

The touch screen needs a few seconds to work after a suspend. Wait a moment and try again.

72_0103_003

10 December 2002

GoBook II™ Help

Page

GoBook II Help

6/22/2004

file://C:\Documents%20and%20Settings\harwoodm.ITRXNT1\Local%20Settings\Temp\~hh4848.htm