User's Manual

45
Section 4. If You Have a Wireless Modem
77-0100-001 12 September 2000
RIM 802D (datatac) for Motient
The RIM 802D radio will be automatically installed through the Plug and Play feature of the Windows operating
system. Once installed the radio can be accessed as COM4.
1 To verify the radio is installed and functioning correctly, a hyperterminal session can be used to access RIM’s
built in diagnostic program.
2 To access this diagnostic program, create a hyterterminal session direct to COM4 with 8 data bits, no parity, 1
stop bit, and hardware handshaking.
3 Once a connection has been established, type “menu” (lower case, without the quotes)and press enter. The RIM
Diagnostic screen should appear.
This diagnostic program allows the user to send a short message either to yourself or another device on the network.
For more information on how use the builtin diagnostics visit the RIM website at www.rim.net.
RIM 902M (Mobitex) for Cingular
The RIM 902M radio will be automatically installed through the Plug and Play feature of the Windows operating
system. Once installed the radio can be accessed as COM4.
1 To verify the radio is installed and functioning correctly, a hyperterminal session can be used to access RIM’s
built in diagnostic program.
2 To access this diagnostic program, create a hyterterminal session direct to COM4 with 8 data bits, no parity, 1
stop bit, and hardware handshaking.
3 Once a connection has been established, type “menu” (lower case, without the quotes)and press enter. The RIM
Diagnostic screen should appear.
This diagnostic program allows the user to send a short message either to yourself or another device on the network.