User's Manual

97
Appendix A. Error Messages
77-0100-001 12 September 2000
-WARNING: Floppy controller failed
-WARNING: Floppy disk track 0 failed
Restart the computer by pressing both mouse buttons for at least ten seconds and then releasing the buttons. If the
problem persists, contact your organization’s help desk.
WARNING: Floppy information invalid - run SCU
Run the System Configuration Utility (SCU) to set the system configuration. If the problem persists, contact your
organization’s help desk. (See Section 5, “Customizing Settings,” for more information about the SCU.)
-WARNING: Keyboard controller failure
-WARNING: Keyboard failure
Reboot the computer by pressing CTRL+ALT+DEL. If the problem persists, the keyboard is not usable; contact your
organization’s help desk.
-WARNING: No bootable floppy drive 0 installed
-WARNING: No interrupts from timer 0
Restart the computer by pressing both mouse buttons for at least ten seconds and then releasing the buttons. If the
problem persists, contact your organization’s help desk.
WARNING: Time/date corrupt - run SCU
Run the System Configuration Utility (SCU) to set the time of day and date. (See Section 5, “Customizing Settings,”
for more information about the SCU.)
WARNING: Unexpected amount of memory - run SCU
Run the System Configuration Utility (SCU) to reinitialize the system configuration. If the problem persists, contact
your organization’s help desk. (See Section 5, “Customizing Settings,” for more information about the SCU.)