User's Manual

96
GoBook Users Manual
77-0100-001 12 September 2000
Shutdown failure
Reboot the computer by pressing CTRL+ALT+DEL. If the message persists, contact your supervisor or your
organization’s help desk.
Unexpected interrupt in protected mode
Reboot the computer by pressing CTRL+ALT+DEL. If the message persists, contact your supervisor or your
organization’s help desk.
WARNING! PC87570 initialization incomplete. Code=XXX
Press ENTER to continue and then restart the computer by pressing CTRL+ALT+DEL. You can continue to use the
computer since basic computer functions may still be operable; however, some functions may not work properly.
If the problem persists, contact your supervisor or your organization’s help desk.
WARNING! Boot sector 0 has changed
The boot sector of the hard drive has been modified. This message also may be displayed when booting from drive C
after booting from another device. Pressing F1 will allow the system to continue to boot. If this problem persists,
contact your organization’s help desk.
-WARNING: CMOS checksum invalid - run SCU
-WARNING: CMOS failure - run SCU
Run the System Configuration Utility (SCU) to set the system configuration. If the problem persists, contact your
organization’s help desk. (See Section 5, “Customizing Settings,” for more information about the SCU.)