User's Manual

EL Backlight - for units with a monochrome display
Press the û÷ key to switch on the screen backlight and the ûø key to
switch it off.
Because the backlight drains more power from the batteries we suggest you use it
only when necessary. The backlight switches off automatically after a few minutes if
no keys have been pressed.
CCFL Backlight - for use with a color display
Press the û÷ key to increase the backlight intensity by one step and the û
ø
key to decrease the intensity by one step. For units with a transflective display
the backlight can be turned off completely. For units with the STN (transmissive)
display the backlight can be reduced to low level intensity but cannot be turned off.
How to enter data
To type numbers or letters, press the appropriate keys. To type a space, press the
large
µ key at the bottom center of the keyboard.
To delete characters you have just typed, press the
ü key.
To type capital letters or to select the characters or functions above each key, hold
down the
þ (SHIFT) key and press the appropriate key.
To select the characters or functions printed on the keyboard overlay, hold down
the
ÿ key and press the appropriate key
If you want to type several capital letters, press the
… key and then press the
appropriate letter keys. When you have finished, press the
… key again.
To start a new paragraph, or to enter data when you have finished typing it, press
the large
´ (ENTER) key.
To open the Microsoft Windows Start menu without using the stylus, press the
†
key.
How to move the cursor
Within Microsoft Pocket Word and most other text-based Windows applications,
you can move the cursor a character or a line at a time with the four arrow keys
(
Š,ˆ,‡ and ‰). To move the cursor up or down several lines, use
„+‡ to move to the start of the current paragraph, or „+ˆ to move to
the start of the next paragraph.
To move the cursor to the beginning of the current word, use
„+‰. To move
to the start of the next word, press
„+Š.
6
may require new software drivers. If in doubt, consult the documentation supplied
with the PC Card.
Fitting a Type III PC Card
•
Type III cards must be fitted into the outside slot, with the front of the card
facing inwards, towards the front of the fex21. Type III cards are keyed to the
slot, so they cannot be fitted into the inside slot.
•
With this in mind, follow the procedure for fitting a Type II PC Card.
Removing a PC Card
•
Remove the PC Card hatch as detailed above.
•
Press the ejector button, either with a finger or with the tip of the stylus. The
card should be left loose in the carriage, and can be pulled out by hand.
Note: The ejector button will eject PCCards from both slots. Cards cannot be
removed individually.
•
Replace the PC Card hatch as previously described.
Accessing files on a storage PC Card
From the Windows desktop, double-click on the My Handheld PC icon. A window
will open. If a storage PC Card is currently fitted, one of the icons in the window will
be a folder called Storage Card. Double-click on the folder to list the contents of
the storage PC Card.
If two storage cards are fitted, there will be two folders: Storage Card and Storage
Card2.
Note: The Storage Card2 name is assigned to the second card inserted, whichever
slot it is located in.
19