User Manual

802.11g Wireless LAN+BT SiP combo Module V2.2

All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI

Current

Transmit 50 mA Typical

Receive 40 mA Typical

Deep Sleep 100 uA Max

4.3. COMPACTFLASH SPECIFICATION

4.3.1. DC ELECTRICALS

The DC specification is under 3.3 voltage. Over full range of values specified in the “Recommended

Operation Condition” unless specified.

Power supply : VDD=3.3V

Symbol Parameter Condition Min Typ Max Units

VIH

Input high voltage 0.5 VDD - VDD+0.5 V

VIL

Input low voltage -0.5 - 0.35VDD V

VOH

Output high voltage 2.4 - - V

VOL

Output low voltage - - 0.4 V

4.3.2. AC ELECTRICALS

The DC specification is under 3.3 voltage. Over full range of values specified in the “Recommended

Operation Condition” unless specified.

Power supply : VDD = 3.3V

Symbol Parameter Condition Min Typ Max Units

IOH

Input high voltage =0.7 VDD 11.3 - 32 mA

IOL

Input low voltage =0.18VDD 10.5 - 38 mA

VOH

Output high voltage 0.2VDD- 0.6VDD 2.4 0.518 4.0 V/ns

VOL

Output low voltage 0.6VDD-0.2VDD - 0.592 4.0 V/ns