User Manual

802.11g Wireless LAN+BT SiP combo Module V2.2

All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI

5.2 BLUETOOTH KEY FEATURES OF THE HCI STACK

5.2.1 NEW BLUETOOTH V1.2 MANDATORY FUNCTIONALITY

z Adaptive Frequency Hopping (AFH)

z Faster Connections

z Flow and Flush Timeout

z LMP Improvements

z Parameter Ranges

5.2.2 OPTIONAL V1.2 FUNCTIONALITY SUPPORTED

z Extended SCO (eSCO), eV3+CRC,eV4,eV5.

z Scatter mode

z LMP Absence Masks, Quality of service and SCO handle

z L2CAP flow and error control

z Synchronisation

5.2.3 STANDARD BLUETOOTH FUNCTIONALITY

z Bluetooth components: Baseband (including LC), LM and HCI

z Standard USB v2.0 and UART (H5) HCI Transport Layers

z All standard radio packet types

z Full Bluetooth data rate, up to 723.2kbps asymmetric

z Operation with up to seven active slaves

z Maximum number of simultaneous active ACL connections:7

z Maximum number of simultaneous active SCO connections:3

z Operation with up to three SCO links, routed to one or more slaves

z Scattermet 2.5 operation

z All standard SCO voice coding, plus “transparent SCO”

z Standard operating modes: page, inquiry, page-scan and inquiry-scan

z All standard pairing, authentication, link key and encryption operations

z Standard Bluetooth power saving mechanisms: Hold, Sniff and Park

modes, including “Forced Hold”

z Dynamic control of peers’ transmit power via LMP

z Master/Slave switch

z Broadcast

z Channel quality driven data rate

z All standard Bluetooth Test Modes

6. CONFIGURABILITY

No user configuration needed. The CIS and MAC Address will be loaded during production of

the WM-BG-MR-01 module.