User Manual

802.11g Wireless LAN+BT SiP combo Module V2.2

All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI

Features Description

WLAN Standards IEEE 802 Part 11b/g (802.11b/g)

Bluetooth

1.1 and 1.2 compliance

Antenna Connector Two antenna connectors support 802.11b/g and BT one for each.

Coexistence Hardware signaling

Frequency Band 2.400 – 2.484 GHz

4.5. RADIO SPECIFICATIONS 802.11G

Features Description

Frequency Band 2.4000 – 2.497 GHz (2.4 GHz ISM Band)

Number of selectable Sub

channels

14 channels

Modulation OFDM, DSSS (Direct Sequence Spread Spectrum),

DBPSK, DQPSK, CCK , 16QAM, 64QAM

Supported rates 1,2, 5.5,11,6,9,12,24,36,48,54 Mbps

Maximum receive level - 10dBm (with PER < 8%)

Output Power

14 dBm +1.5/-1.0 dBm for 1, 2, 5.5, 11Mbps

14 dBm +/- 1.0 dBm for 6, 9Mbps

12 dBm +/- 1.0 dBm for > 12Mbps

Receiver Characteristics

( 3.3V, 25 degree C )

Typical Max. Unit

PER <8%, Rx Sensitivity @ 11 Mbps

-87 -85 dBm

PER <8%

Rx Sensitivity @ 5.5 Mbps -89 -87 dBm

PER <8%, Rx Sensitivity @ 2 Mbps -90 -88 dBm

PER <8%, Rx Sensitivity @ 1 Mbps -92 -90 DBm

PER <10%, Rx Sensitivity @ 54 Mbps -72 -70 DBm

4.6. RADIO SPECIFICATIONS 802.15 BLUETOOTH

The Radio specification is compliant with the

Bluetooth

1.1 and 1.2 class 2 specification

Features Description

Frequency Band 2400 ~ 2483.5 MHz

Number of Channels 79 channels