User's Manual

AirCard 800 Series Installation Guide
36 2130623
additional FCC / IC certification if they meet the following
conditions. Otherwise, additional FCC / IC approvals must be
obtained.
1. At least 20 cm separation distance between the antenna
and the user’s body must be maintained at all times.
2. To comply with FCC / IC regulations limiting both
maximum RF output power and human exposure to RF
radiation, the maximum antenna gain must not exceed 8
dBi in the Cellular band and 4 dBi in the PCS band.
3. The AirCard 850/860 card and its antenna must not be
colocated with any other transmitter or antenna within a
host device.
4. A label must be affixed to the outside of the end product
into which the AirCard 850/860 is incorporated, with a
statement similar to the following:
For an end product with an embedded AirCard 850:
This device contains TX FCC ID: N7NAC850.
This equipment contains equipment certified under IC:
2417C-AC850.
For an end product with an embedded AirCard 860
This device contains TX FCC ID: N7NAC860.
This equipment contains equipment certified under IC:
2417C-AC860.
5. A user manual with the end product must clearly indicate
the operating requirements and conditions that must be
observed to ensure compliance with current FCC / IC RF
exposure guidelines.
The end product with an embedded AirCard 850/860 card
must pass the unintentional emission testing and properly
authorized per FCC Part 15 requirements.
Note: If this PC Card is intended for use in a portable device,
you are responsible for separate approval to satisfy the SAR
requirements of FCC Part 2.1093 and IC RSS-102.
EU regulatory conformity
Sierra Wireless hereby declares that the AirCard 850 is in
conformity to all the essential requirements of Directive 1999/
5/EC.
: