User Manual

Using CompactFlash cards
Accessing Files on a CompactFlash card
Accessing files on a CompactFlash card
Tap the Windows icon > Programs > File Explorer > My Device > Compact Flash.
The screen displays a list of the files stored on the CompactFlash card.
See Also
About CompactFlash cards
Using CompactFlash cards
Fitting a CompactFlash card
Peripherals
The GoBook Q•100 has two COM ports, a wireless infrared (IR) port and an audio jack
and microphone jack. It also has a client only USB connection via the Itronix 26-way to
USB cable. CAUTION Connect only approved cables and peripherals to your Itronix
GoBook Q•100.
To connect a peripheral via one of the GoBook Q•100's COM ports:
1. Switch off both the GoBook Q•100 and the peripheral.
2. Fit the peripheral to the cable (if detached).
3. Fit the peripheral cable to the GoBook Q•100.
4. Switch on both the GoBook Q•100 and the peripheral.
NOTE If the peripheral must connect to COM1 (left port) and you wish to operate the
GoBook Q•100 from an external power unit, you may switch the charging cable from
COM1 to COM4 (right port).
To connect a peripheral via the infrared (IR) COM port:
1. Ensure that the GoBook Q•100's IR window at the bottom of the unit is pointing
at the peripheral's IR port and that the units are separated by at least 15cm (6
inches).
2. If the peripheral has a protective cap covering its IR port, remove it.