User's Manual

I can’t save files because the disk is full
z
Report this situation to your supervisor or your organization’s help desk.
Keyboard
Something unexpected happens when I press a key
z
You may have pressed a key combination that performs a Windows function. Make sure you are
pressing the correct keys for the application
you are running.
Incorrect characters appear on the screen when I press certain keys
z
You may be in NUM LOCK mode. Press FN+NUM LOCK to toggle NUM LOCK mode off.
Landline Modems
The modem doesn’t work
z
When you first try to use HyperTerminal or similar application , the system responds with a
message asking if you want to install the modem. Answer “Yes” to this question and follow the
instructions on the screen to install it.
z
Make sure the communication settings are correct in your application. Refer to the online Help for
your application.
The modem doesn’t dial a number
Check these things:
z
If you are using an external modem, make sure the cables are attached correctly.
z
Make sure your communications parameters are correct in your application. Refer to the online
Help for your application.
The modem dials and receives an answer but does not establish a connection
z
You may have incorrect parameters selected for your application to talk with the remote modem.
Refer to the online Help for your application.
z
You may need to adjust your modem’s baud rate or protocol selection.
Communications programs such as HyperTerminal or Procomm Plus don’t seem to work or they lock
Windows
z
If you are using the internal modem, be sure to specify the proper communications port .
z
When you first try to use HyperTerminal or similar application, the system responds with a
messa
g
e askin
g
if
y
ou want to install the modem. Answer “Yes” to this
q
uestion and follow the
Pa
g
e 89 of 100GoBook PRO II Hel
p
5/16/2005file://C:\Documents%20and%20Settin
g
s\barvill
j
.ITRXNT1\Local%20Settin
g
s\Tem
p
\~hh7...