User's Manual

menu
Primary Slave sub-
menu
Configure Peripherals
Stealth Mode Configuration sub-
menu
Configure Stealth Mode
I/O Device Configuration sub-
menu
Configure I/O Devices
Photo Sensor Control sub-
menu
Set photo sensor settings
Legacy USB Support Disabled
Enabled
When set to enable, system can
support legacy USB devices
Radio Power Off
On
When this option is set to "on", all
wireless devices are powered on
when the system reboots
WWAN Radio Wakeup Disabled
Enabled
This option determines the WWAN
radio power when the system is
suspended.
When set to "Disabled" the radio
power is turned off before system
enters standby state (S3)
When set to "Enabled" the radio
power it turned on before the system
enters S3
Boot On AC Power Detect Disabled
Enabled
Once the user plugs in AC Power,
the system will boot up or resume
automatically if this option is set to
enable
Thermal Protection Disabled
Enabled
If enabled, the system can NOT boot
up in temperatures between 0 and -
20 C. If disabled, the system can
boot up in these temperatures
UMA Share Memory 64MB
128MB
The size of the main memory that is
allocated to support the Internal
Graphics device in VGA
LED Keyboard Timeout Setting5Min
10Min
15Min
20Min
30Min
40Min
50Min
60Min
80Min
100Min
120Min
240Min
Choose the interval at which the
timeout counter is reset for PS2 key
and/or mouse activities
Lid Opened Nothing
Resume
If set to "Nothing" there is no action
taken when the Lid is opened.
If set to "Resume", the system will
Pa
g
e 65 of 100GoBook PRO II Hel
p
5/16/2005file://C:\Documents%20and%20Settin
g
s\barvill
j
.ITRXNT1\Local%20Settin
g
s\Tem
p
\~hh7...