User's Manual

Revision 7/7/05 36
VPN Client: VZAccess Manager automatically detects if certain VPN clients like Microsoft, Cisco, CheckPoint, etc are
installed on the computer and allows you to select the one you wish to use. Check with your network administrator to
setup your VPN connection.
If the VPN client you wish to use does not appear in the list, you can select Other VPN Application
Other VPN Application: This allows automatically running any VPN program when you use VZAccess Manager to
connect to the Wi-Fi network you added or edited. Select the browse button to browse to the desired VPN application you
want to run when you connect to the Wi-Fi network you added or edited, using VZAccess Manager. If you have a shortcut
you normally use to launch your VPN application you may want to right click on it and select properties to see where the
program is located and how it's named.
Option Tab
The last tab in Preferences that has Wi-Fi specific settings is the Options tab ("Options", "Preferences", "Options"):
Only show preferred wireless networks at start up: This only applies to Wi-Fi networks. If checked, at startup, only
networks in your Preferred list on the Wi-Fi tab are displayed (networks you have connected to in the past) otherwise, all
detected networks are displayed. You also have the option in the main screen of VZAccess Manager of selecting "Show All
Networks" when only preferred networks are displayed and you have the option to select "Show Preferred" networks
when VZAccess Manager is set to show all detected networks.
Display advanced Wi-Fi network information: This only applies to Wi-Fi networks. If checked, additional information
will be displayed for Wi-Fi networks such as the channel, MAC address and type of security.
The rest of the features on this tab are explained in the section on Setting Your Preferences.
5.4 TXT MESSAGING SETTINGS
The following options are available for PC Cards only that support TXT Messaging.
TXT Messaging Preferences