User's Manual

Revision 7/7/05 13

Step 3

In this step of the Setup Wizard you must specify the

type of wireless device that you intend to use with

VZAccess Manager. Select "Detect both Wi-Fi and

WWAN", "Detect WWAN device only (1xEV-

DO/1xRTT/CDMA)". For the purposes of this guide,

"Detect both Wi-Fi and WWAN" will be used. Please

note that your experience in Step 4 may be different if

you use a different selection. After making the

appropriate selection, click Next to continue.

Step 4

In this step VZAccess Manager will detect the Wi-Fi

adapters on your computer. If your computer has a

built-in Wi-Fi adapter, you do not need to do anything

and can proceed to the next step. Otherwise, please

insert your Wi-Fi PC Card now. You will need the

drivers for the card if not already installed on the

computer. Once complete, click Next to continue.

Note: WWAN (Wireless Wide Area Network) denotes any 1xEVDO, 1xRTT or CDMA connection to the Verizon

Wireless network such as BroadbandAccess, NationalAccess or Quick 2 Net.