User's Manual

The fax/modem RJ-11 jack can transmit data using the 56 Kbps V.90 or V.92 protocol, and send and receive faxes at

14.4 Kbps. In some countries, local regulations may not permit the use of the fax/modem designed for this system.

In this case, you may use a PCMCIA modem.

CAUTION

Plug your modem into an analog telephone jack only. Most homes use analog lines. Do not use digital

lines, such as PBX and ISDN systems found in many offices. Digital lines may damage your modem. If you are

unsure as to the type of port you have to plug into, contact your building superintendent. Simple detection and

rotection devices are also available at most computer stores and should be used to protect the Duo-Touch II.

NOTE

Port access to connect the modem is disabled for the Australian market.

Attaching USB Devices

The two Universal Serial Bus (USB) 2.0 ports enable you to attach USB devices such as keyboards, a mouse,

scanners, and printers.

Using PC Cards

The Duo-Touch II has a T

e II PC Card Slot located on the to

side of the com

uter. It su

orts 32 bit Card Bus

e 20 of 57Duo-Touch II Hel

2/28/2008file://C:\Documents and Settin

s\harwoodm\Local Settin

s\Tem

\~hh5E31.htm