User's Guide
Table Of Contents
- Notices and Safety
- Getting Started
- Getting Familiar
- Making Connections
- Wireless Communication
- Battery Power
- BIOS Setup Utility
- Maintenance and Storage
- Optional Equipment
- Service and Support
- Troubleshooting
- For More Help
- Applications
- Batteries
- Hard Disk
- Landline Modems
- The modem doesn’t work
- The modem doesn’t dial a number
- The modem dials and receives an answer but does not establish a connection
- Communications programs such as HyperTerminal don’t seem to work or they lock Windows®
- The modem dials and the answering modem generates tone, but our modem does not begin the training sequence to establish a connection
- Miscellaneous
- The computer shuts off unexpectedly
- The speaker volume is too high or too low
- The computer won’t turn on
- The computer won’t turn off
- The computer enters suspend mode too quickly
- The computer doesn’t automatically suspend
- The system date and time are incorrect
- I receive an “out of memory” error message
- Holding down the Power button to reset the computer doesn’t always work
- PC Cards
- Pen / Display
- When I try to use the pen on my display, nothing happens
- The display warps or pillows in high humidity
- The touch screen doesn’t respond after a suspend
- I cannot change the orientation
- The display performance is slow
- I can’t read the display
- The underlined, inverse, and hypertext characters are difficult to read on the screen
- I can’t see the cursor while using the DOS editor
- The display appears to have random pixels darkened after scrolling
- I changed my display resolution, but I see no difference on the screen
- The display cuts off the right side of the application or page in portrait mode
- FAQs
- How do I calibrate the pen/display?
- How do I change the main battery?
- How do I adjust the speaker volume?
- How do I clean the display screen?
- How do I change the display screen’s brightness?
- How do I change the display orientation?
- How do I switch between Digitizer and Touch Screen modes?
- How long will the battery last?
- How do I optimize the GD3080 for left handed use?
- Where can I find the user manual?
General Dynamics Itronix | 72-0145-001
GD3080 User Guide
BIOS Setup Utility
Trusted Computing
Field Setting Function
TCG/TPM Support
yes
No
Enable/Disable TPM TCG (TPM
1.1/1.2) support in BIOS
Execute TPM
Command
don’t
Change
Disabled
Enabled
Enable (Activate) / Disable (Deacti-
vate) / Don’t change (leave settings
in last configuration)
Enable (Activate) / Disable (Deacti-
vate) Command to TPM
TPM Enable/Disable
Status
Disabled This displays the current status of
the TPM
TPM Owner Status Unowned This displays the current Ownership
status of the TPM
SuperIO Configuration
Field Setting Function
Serial Port1
Address
Disabled
3F8/irq4
3E8/IRQ4
2E8/IRQ3
Select serial port 1 interrupts and IRQ set-
tings
Serial Port2
Address
Disabled
2F8/irq3
3E8/IRQ4
2E8/IRQ3
Select serial port 2 interrupts and IRQ set-
tings
Serial Port3
Address
Disabled
3F8
2F8
3e8
2E8
Sets address for serial port 3
Serial Port3
IRQ
IRQ4
IRQ5
IRQ10
IRQ11
Sets IRQ for serial port 3
Serial Port4
Address
Disabled
3F8
2F8
3E8
2e8
Sets address for serial port 4
Serial Port4
IRQ
IRQ3
irq6
IRQ10
IRQ11
Sets IRQ for serial port 4