User's Guide
Table Of Contents
- Notices and Safety
- Getting Started
- Getting Familiar
- Making Connections
- Wireless Communication
- Battery Power
- BIOS Setup Utility
- Maintenance and Storage
- Optional Equipment
- Service and Support
- Troubleshooting
- For More Help
- Applications
- Batteries
- Hard Disk
- Landline Modems
- The modem doesn’t work
- The modem doesn’t dial a number
- The modem dials and receives an answer but does not establish a connection
- Communications programs such as HyperTerminal don’t seem to work or they lock Windows®
- The modem dials and the answering modem generates tone, but our modem does not begin the training sequence to establish a connection
- Miscellaneous
- The computer shuts off unexpectedly
- The speaker volume is too high or too low
- The computer won’t turn on
- The computer won’t turn off
- The computer enters suspend mode too quickly
- The computer doesn’t automatically suspend
- The system date and time are incorrect
- I receive an “out of memory” error message
- Holding down the Power button to reset the computer doesn’t always work
- PC Cards
- Pen / Display
- When I try to use the pen on my display, nothing happens
- The display warps or pillows in high humidity
- The touch screen doesn’t respond after a suspend
- I cannot change the orientation
- The display performance is slow
- I can’t read the display
- The underlined, inverse, and hypertext characters are difficult to read on the screen
- I can’t see the cursor while using the DOS editor
- The display appears to have random pixels darkened after scrolling
- I changed my display resolution, but I see no difference on the screen
- The display cuts off the right side of the application or page in portrait mode
- FAQs
- How do I calibrate the pen/display?
- How do I change the main battery?
- How do I adjust the speaker volume?
- How do I clean the display screen?
- How do I change the display screen’s brightness?
- How do I change the display orientation?
- How do I switch between Digitizer and Touch Screen modes?
- How long will the battery last?
- How do I optimize the GD3080 for left handed use?
- Where can I find the user manual?
General Dynamics Itronix | 72-0145-001
GD3080 User Guide
BIOS Setup Utility
The Main Menu
Field Setting Function
AMIBIOS For information
only
Version
Motherboard For information
only
Version
Processor For information
only
Type and Speed
System Memory For information
only
Size
System Time HH:MM:SS Configure system time
System Date MM/DD/YYYY Configure system date
Digitizer Calibration Opens the Digi-
tizer Calibration
Utility
Begins the digitizer calibration.
Once you have calibrated the dis-
play, the computer will restart.
The Advanced Menu
Field Setting Function
Trusted Computing Sub-Menu Configure settings related to TPM
SuperIO Configuration Sub-Menu Configure I/O port interrupt and IRQ
settings
Fan Learning Function Sub-Menu Fan Learning Function will take 2
minutes to finish procedure
Stealth Mode
Configurations
Sub-Menu Depending on Stealth Mode setting,
LED, FAN Beeps, LCD Brightness,
Audio and Wireless devices will
keep silent when you need
Extended
Configuration
Sub-Menu Other special function settings
including low battery beep, radio
wakeup, etc.