User's Manual

General Dynamics Itronix 72-0139-001
GD2000 User Guide
Customizing the BIOS
Field Setting Function
Set Supervisor
Password
Enter New Password
Confirm New Password
The supervisor password controls access to the Setup Utility. The
password must be entered and confirmed. The password can be
removed or changed by pressing enter on this field and entering the
current password, then pressing enter to move though the fields enter-
ing a new password, or leaving it blank to remove the password.
Set User Password Enter New Password
Confirm New Password
The user password controls access to the system at boot. The pass-
word can be removed or changed by pressing enter on this field and
entering the current password, then pressing enter to move though the
fields entering a new password, or leaving it blank to remove the pass-
word. This password can only be entered if the supervisor has entered
a password first.
Password on Boot
DISABLED
Enabled
Enables user password entry on boot.
Set HDD Password Allows the user to set a password on the HDD.
TPM Support
Submenu
Trusted Computing (TPM) settings.
Trusted Platform Module (TPM) Menu
Security Menu with TPM Support
Adding an expansion module with a TPM device, adds the
TPM support option to the BIOS Security menu.
WARNING Read all the instructions below and back up
your data, before attempting to activate this security feature.
If you have any questions or concerns contact the
Client
Care Center
for support.
Enable TPM Support to display the TPM State menu item
in the menu banner at the top of the screen.
Field Setting Function
TPM Support
DISABLED
Enabled
Enables or disables the TPM support. Operation system will not show
TPM. Reset of platform is requied.