User's Manual

General Dynamics Itronix 72-0139-001
GD2000 User Guide
Customizing the BIOS
Battery Calibration Sub-Menu
The Battery Calibration process empties and charges the
battery, allowing the battery gauge to accurately monitor
the battery status. It will take from 10 to 16 ours to calibrate
the battery, depending on how much power the battery
already contains.
Field Setting Function
Calibration Status Displays current battery calibration status, Non-Execute or Execute.
Remaining capacity (none) Displays the remaining battery capacity.
Remaining capacity (none) Displays the remaining battery capacity.
Battery Serial Number (none) Displays the battery serial number.
Battery Status (none) Displays the current battery status.
Full Charge Capacity (none) Indicates the full charge capacity.
Battery Voltage (none) Displays the battery voltage.
Battery Average Current (none) Displays the battery average current.
BQ2060 Pack Status (none) Displays the BQ2060 Pack Status.
Last Calibration Capacity (none) Displays the last calibration capacity.
Last Calibration Date (none) Displays the last calibration date.
Execute Battery Calibration Yes
No
Select Yes to execute the Battery Calibration process. Battery calibra-
tion will take from 10 - 16 hours, depending upon how much power the
battery already contains.
The Security Menu
You can set, change or remove passwords in the Security
menu.
NOTE If you have an Expansion Module installed and it
has TPM, the screen may have an additional TPM support
item listed in the table above. Please read the
Trusted
Platform Module (TPM)
section of this manual before
activating this feature.