User's Manual

When HDD protection is activated, there will be a pop-up window

shown on the screen once a free fall or abrupt motion detected.

At this situation, all disk access requests will be blocked. Certain

application may detect some error if they set timer when accessing

files. But others are just waiting their disk I/O to complete. User may

release the hard disk by pressing OK button. Otherwise HDD will be

released automatically after some preset time period (5 seconds by

default) if no more free-fall or movements is detected.

You may also find the HDD protection

icon at the task bar.

When the icon shows green, it means that the HDD protection

function is on. When the icon shows red, it means that the HDD

protection function is off.

LCD Screen

z 10.4” XGA (1024x768) TFT LCD

z LED Backlight

z Luminance: 165 nit (minimum), 240 nit (typical)

z Contrast ratio: 120 (minimum), 250 (typical)

z Light Sensor

The built in ambient light sensor is to adjust the brightness of LCD.

This will be performed automatically while in battery mode for saving

power, and can be enabled/ disabled through setting in the BIOS.