User's Manual

3-11
Table 3-3. Remote Transceiver Operation Commands (Cont)
CODE NAME DESCRIPTION
EQUIVALENT
TRANSCEIVER
KEYPAD COMMAND
T
Note 1
Transmit Frequency The “T” Command sets the transmit frequency
value for the current preset channel.
The “T” Command followed by 6 digits will
define a transmit frequency value. The 7
th
digit
is automatically determined by the transceiver.
The ‘x’ values, along with the 7
th
digit, must be
divisible by 25 kHz, 12.5 kHz, or 5 kHz.
"Txxxxxx" = transmit frequency
Transceivers with the EBN-30 Option, for the
30-90 MHz band, the first digit following the “T”
Command will be a "0" which is then followed
by 5 digits to define the transmit frequency
value. The 7
th
digit is automatically determined
by the transceiver. The ‘x’ values, along with
the 7
th
digit, must be divisible by 25 kHz or 12.5
kHz.
“T0xxxxx” = transmit frequency for the 30-90
Band
Transceivers with the EBN-400 Option, for the
400-420 MHz band, the first digit following the
“T” Command will be a "4" which is then
followed by 5 digits to define the transmit
frequency value. The 7
th
digit is automatically
determined by the transceiver. The ‘x’ values,
along with the 7
th
digit, must be divisible by
25 kHz, 12.5 kHz, or 5 kHz.
“T4xxxxx” = transmit frequency for the 400-420
Band
R/T

BCN
1
FREQ
0 – 9
XXX
(ENTER 6 DIGITS)
(See paragraphs 2-3.2.5
and 2-3.2.2)
M
Note 1
Modulation Mode
TRANSMIT/RECEIVE
The “M” Command followed by a 0 or 1 will
select the transmit and receive modulation
mode that is to be displayed and used.
"M0" = TRANSMIT/RECEIVE AM
"M1" = TRANSMIT/RECEIVE FM
AV
4
AM/FM
(See Paragraph 2-3.2.3)
N
Note 1
Modulation Mode
TRANSMIT only
The “N” Command followed by a 0 or 1 will
select only the transmit modulation mode that
is to be displayed and used.
"N0" = TRANSMIT AM
"N1" = TRANSMIT FM
R/T

AV
4
AM/FM
(See paragraphs 2-3.2.5
and 2-3.2.3)