User's Manual

3-8
Table 3-2 URC-200 (V2) Operational Frequency-Based Dependencies.
30-90 MHz
1
115 - 173.995 MHz 225 - 399.995 MHz 400-420 MHz
1
AM
N Y
2
Y N
FM
Y Y Y Y
PT
Y Y Y Y
CT
Y Y Y Y
Tone Squelch
(150 Hz)
PT only
(unless custom
code used) N N N
25 kHz Tuning
Y Y Y Y
12.5 kHz Tuning
Y
Y
N in Aviation Mode)
Y
N in Aviation Mode) Y
5 kHz Tuning
N
Y
N in Aviation Mode)
Y
N in Aviation Mode) Y
8.33 kHz Tuning
1
N Y Y
N
RX IF Filter
1,3
Selectable
(AM PT)
NA Non-Aviation: Y
Aviation: N (Auto)
4
NA NA
Pre/De-Emphasis
(FM PT)
N
Y
(132-173.995 MHz)
N Y
FM RF Output
Power
5, 1, or 0.15 Watts 10, 5, or 0.1 Watts 10, 5, or 0.1Watts 10, 5, or 0.1Watts
AM RF Output
Power
NA 10 or 5 Watts 10 or 5 Watts NA
1
Indicates an option.
2
Transceiver operates over full band, but spec is guaranteed from 115 - 149.995 MHz only.
3
The 8.33 kHz filter only applies to 117.975 – 136.975 MHz.
4
(Auto). Indicates that as you enter the frequency, an 8.33 or 25 kHz channel is selected and the
correct filter is automatically selected, depending on the value entered.