User's Manual

Table Of Contents

2-8

2-3.2.4 Select Cipher Text/Plain Text

Pressing the [PCV] key toggles between the plain-text and cipher-text (data)

modes for the currently-displayed channel. The new value will take effect

immediately when the [STO] key is pressed, as indicated by the annunciator.

2-3.2.5 Select Receive/Transmit Data

R/T

Pressing the [R/T] key switches the display between the receive frequency and

its operating data for the selected channel and the transmit frequency and data

for that channel. When the transmit data is displayed, the transmit

annunciator, TX will blink. This key is also used as "back-space" when in the

frequency select mode as described in Paragraph 2-3.2.2.

2-3.2.6 Storing Presets

STO

Pressing the [STO] key stores into memory the frequencies (receive and

transmit), mode (PT/CT), modulation (AM/FM), transmit power (Tx),

bandwidth, and scan list membership for the selected channel.

2-3.2.7 Select Scan Channels

Pressing the [SCAN] key switches the selected preset channel on or off the

scan list. The scan list must contain from two to ten of the preset channels

before the scan mode can operate. The SCAN annunciator will light to indicate

that this preset channel is on the scan list.