User's Manual

1-13
 UAD-100A Uninterruptible Power Supply
Intended for “jerk-and-run” applications, the UAD-100A power supply
operates from a110/220-Vac source but includes two batteries which
power the radio when disconnected from the source.
1-9.2 BATTERY CHARGERS
 UBS-110 Battery Charger
Commercial grade battery charger charges a single battery.
 LSBC-102 Battery
Charger
Ruggedized, military grade battery charger charges a two batteries at
once.
1-9.3 INTERFACE BOXES
 UIB-100/100A
Power Interface Box
Power distribution box that attaches to the rear of the URC-200 (V2)
transceiver. Provides the mechanical connections to distribute unfiltered
28Vdc from a power supply or other source to the transceiver and power
amplifier.
 UFB-100/100A Power Filter Box
Power distribution box with internal filter that attaches to the rear of the
URC-200 (V2) transceiver. Provides
the mechanical connections to
distribute filtered 28Vdc from a power supply or other source to the
transceiver and power amplifier.
 UBC-100 Battery Box
Attaches batteries to the rear of the URC-200 (V2) Transceiver
1-9.4 SHOCK TRAYS AND MOUNTS
 UST-100 Shock Tray
Used to mount the URC-200 (V2) Transceiver and power interface/filter
box in a vehicular or other setting where shock and vibration damping is
required.
 UST-200 Shock Tray
Mounts
Used to mount the URC-200 (V2) Transceiver in a 10 watt or 30/50 watt
system configuration in a vehicular or other setting where shock and
vibration damping is required.
 URM-100 Rack Mount
Used to mount the URC-200 (V2) Transceiver in a 10 watt or 30/50 watt
system configuration in a 19” rack.
1-9.5 CABLES