User's Manual

99-P42565K 75
When in a call, use the PPT key just as you would when using the radio in the voice
mode. That is, push to talk and release to listen.
Callers from conventional telephones must dial the GSM Gateway’s telephone number.
Upon connection, callers will be prompted to also enter the target radio’s Unit ID
number.
Gateway - Analog GateWay
In this mode you can use the gateway to communicate with other devices. Radios
connect to the Analog Gateway over-the-air.
The Multi-GW unit defines which units in the Pathmaker network will receive the analog
network session and defines which Pathmaker network sessions will be transmitted to
the analog network.
• When the [A] icon is present on the general screen of the unit, in “Talk” mode of the
unit will appear additional talk mode “Analog GW”.
• Use regular broadcast call in order to perform a voice call to the analog network.
• Management of the Multi GW unit can be done from the Pathmaker Suite application
remotely.
• Only one session to/from analog network can be done at a time.