User's Manual

74 99-P42565K
GATEWAYS
Gateways are optional and are documented separately. Please refer to the
documentation supplied with the gateway for setup and system integration
information. The following section applies only after the integration process has
been completed and the radio has established contact with a gateway.
Many of the screens shown below are not be available unless the radio has been
integrated with a gateway.
Gateway - GSM GW
This mode enables you to send and receive conventional telephone calls using the
radios. Any radio in the network can place a call t by dialing the desired telephone
number by using the keypad.
Similarly, any conventional telephone is able to place a call directly to any radio in the
network. To do so, callers must know the telephone number of the GSM Gateway and
the Unit ID of the desired radio.
The GSM Gateway icon
G
displays on
the Main screen upon making the
connection.
The radio’s network ID number is shown to
the right of the Gateway icon. In this
example it is 2.
When in a GSM gateway configuration, you can place a call from a radio by dialing the
called party’s phone number as you would from a conventional telephone. After the
number is dialed, press and release the P2 shortcut key to place the call.
To answer an incoming call, press and release the P1 shortcut key.
To end a call, press and release the P3 shortcut key.