User's Manual

99-P42565K 61
TECHNICIAN - MASTER RESET
This screen is used to reset the unit to its default parameters.
Press Confirm to endorse the reset
operation of the unit to its default version
parameters.
TECHNICIAN - BER METER
This screen is used to check the quality of RF reception without correction or in FEC
mode with correction.
To initiate the BER (Bit Error Rate) test,
set one unit to Transmit mode and the
other unit to Receive mode.
Select Transmit to view the transmit Baud
rate.
The test results are displayed on the
receiver unit.
To initiate the FEC (Forward Error
Correction) test, set one unit to Transmit
mode and the other unit to Receive mode.
Note:
Verify that both units are on the same
channel and mode (with or without FEC).
TECHNICIAN - LISTEN MODE ON/OFF
The unit in Listen mode cannot transmit and does not relate to the network structure. It
will not be displayed on the MATRIX of the units in the network.