User's Manual

60 99-P42565K
TECHNICIAN - SELECT CHANNEL
All radios must be on the same channel to communicate.
Channels are numbered from 1 to 40.
Select the appropriate channel and press
Select. The number of the selected
channel will be displayed on the main
menu.
TECHNICIAN - EDIT GROUP
This screen displays the list of group names which can be edited further.
Group names must match in order for the
radios to communicate in a group. If a
given group name is changed in one radio,
the name of the same group has to be
changed in all units related to same
network.
TECHNICIAN - REMOTE UPDATE
This screen is used to update the firmware version.
Select a separate channel for all units to
be updated.
On units to be updated, select Receive
Update and then press Select.
Select an updated unit with the relevant
firmware version, set it to Transmit
Update and then press Select.
There
should be a minimum distance of
1.5 meters between the transmit unit and
the receive units. Verify that line of sight
exists between transmitting unit and
receiving units.