User's Manual

99-P42565K 59
1st Level
2nd Level
Function
Compilation
Date
Displays date of
compilation
About
HID
NID
SW
HW
Hard ID of the unit
Network ID of the
network
Software version
Hardware version
Notes:
* Edit group should be executed on all units related to the operating network.
** The minimal distance between transmit and receive unit should be 1.5 meters.
Transmit unit must be in line of sight with the receive units. All units must be on the
same channel.
*** BER (bit error rate) tests the quality of RF reception between two units. Test can be
executed with FEC (Forward Error Correction) or without. Both units have to be on the
same channel and on the same mode (FEC / no FEC).
**** Unit in listen mode receives information from directly received units depending on
network condition.
***** When this function is activated, the display and LEDs dim, keyboard locks and
volume mutes. (In this mode the unit serves usually as a relay station).