User's Manual

99-P42565K 51
SETTINGS – COM PORTS
Select the applicable serial communication port and connect the cable. The USB
receptacle is located on the top of the unit.
Com Port Selection Screen.
Use this screen
to set the USB or RS-232 port.
Port Options Screen.
After you select the
applicable port, the Port Options screen
displays.
Select the applicable option from the list.
Baud Rate Adjustment Screen
The baud rate screen allows you to set the
serial baud rate of the unit.
The baud rate settings are used for data
and gateway voice/data communications.
The default is 921600. Use the default
Baud rate the first time you use the device.
Loopback is a test function only and sets
the local loop back of the unit on or off.
Alarms can be set on or off.
To activate the selected port, set this
option on.
SETTINGS - ACCESSIBILITY
The accessibility settings allow you to configure the unit for convenient utilization.
Accessibility Screen.
Available settings are:
• Language
• Contrast
• Volume
•
MIC Sensitivity