Installation Manual

DRAFT COPY
NOMAD MXU Installation Manual
3:36 PM 02/12/99
DRAFT COPY
18
4.3.3 Power Connection
WARNING
Improper AC Mains Grounding Hazard
Ensure the AC mains power is properly grounded before connecting the equipment. Failure to
observe this warning can result in serious injury or death by electrocution.
Step 10. Using the correct power cord, connect the local power (??????110 VAC, 60 HZ or 230 VAC 50
HZ) to the MXU’s back panel’s power outlet. If the local power wall socket is not the correct
configuration for the supplied power cord, Go back to Section 4.3.2, step 2.
4.3.4 PSTN to MXU Inter-Connections
Figure 4.3.4-1: MXU PSTN Interconnections
CAUTION
Digital Telephone Line
Ensure the telephone lines are capable of accepting analog signals. DO NOT attempt to connect
to a digital telephone line – equipment damage will result.
Using the four supplied telephone lines, connect the local PSTN to MXU back panel connectors Lines 1,2,3
and 4. NOTE: If the PSTN socket is not a RJ-11 type, refer to the “Pre-Installation Check List”,
Appendix “A”, Check 5.
Fan
Power
Supply
Fan
SIM Access Cover
Antenna 1
Antenna 2
Antenna 3
Antenna 4
Line 1 Line 2
Line 3 Line 4
Connect to
PSTN