User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Mesh Point CLI and Administrative Access
- Chapter 3 Networking and Radio Configuration
- 3.1 Network Interfaces
- 3.2 Network Bridging
- 3.2.1 Bridging Configuration
- 3.2.2 FastPath Mesh Bridging
- 3.2.3 Fine-tuning FastPath Mesh Network Performance
- 3.2.3.1 Selecting the FastPath Mesh Multicast Transmit Mode
- 3.2.3.2 Setting the FastPath Mesh Packet Interval
- 3.2.3.3 Setting the FastPath Mesh Transmit Control Level
- 3.2.3.4 Setting Multicast Video Clamping Thresholds
- 3.2.3.5 Setting Mesh Routing Reactivity
- 3.2.3.6 Setting Mesh Packet Time To Live
- 3.2.3.7 Viewing Current Mesh Performance Parameters
- 3.2.3.8 Frame Processor Parameters
- 3.2.4 STP Bridging
- 3.3 Global Radio Settings
- 3.4 Individual Radio Settings
- 3.4.1 Radio Band, Short Preamble, Guard Interval
- 3.4.2 Channel Selection
- 3.4.3 Distance, Beacon Interval, Noise Immunity
- 3.4.4 Network Type, Antenna Gain, Tx Power
- 3.4.5 MIMO
- 3.4.6 STBC
- 3.4.7 Channel Lock and Other Channel Selection Features
- 3.4.8 DFS, TDWR, and Channel Exclusion
- 3.4.9 Radio BSS Settings
- 3.4.9.1 BSS Radio, BSS Name and SSID
- 3.4.9.2 WDS Bridging or AP Infrastructure Configuration
- 3.4.9.3 BSS State, SSID Advertising and Drop Probe Requests
- 3.4.9.4 BSS STA Idle Timeout and 802.11g-Only Settings
- 3.4.9.5 BSS Unicast Transmission Rate Settings
- 3.4.9.6 BSS WMM QoS Setting
- 3.4.9.7 BSS Fragmentation and RTS Thresholds
- 3.4.9.8 BSS DTIM Beacon Countdown
- 3.4.9.9 BSS VLANs Settings
- 3.4.9.10 BSS Fortress Security Zone
- 3.4.9.11 FastPath Mesh BSS Cost Offset
- 3.4.9.12 BSS Multicast Settings
- 3.4.9.13 Bridging MTU and Beacon Encryption
- 3.4.9.14 BSS Description
- 3.4.9.15 BSS Wi-Fi Security Configuration
- 3.4.10 Antenna Tracking / Rate Monitoring
- 3.4.11 ES210 Mesh Point STA Settings and Operation
- 3.4.11.1 STA Radio, Name, SSID and SSID Roaming
- 3.4.11.2 STA State
- 3.4.11.3 STA Unicast Transmission Rate Settings
- 3.4.11.4 STA Background Scanning
- 3.4.11.5 STA WMM QoS Setting
- 3.4.11.6 STA Fragmentation and RTS Thresholds
- 3.4.11.7 STA Multicast Rate
- 3.4.11.8 STA Description
- 3.4.11.9 STA Wi-Fi Security Configuration
- 3.4.11.10 Editing or Deleting a STA Interface Connection
- 3.4.11.11 Establishing a STA Interface Connection
- 3.4.11.12 ES210 Station Access Control Lists
- 3.5 Local Area Network Configuration
- 3.6 Time and Location Configuration
- 3.7 GPS and Location Configuration
- 3.8 DHCP and DNS Services
- 3.9 Ethernet Interfaces
- 3.10 Quality of Service
- 3.11 VLANs Implementation
- 3.12 ES210 Mesh Point Serial Port Settings
- 3.13 Mesh Viewer Protocol Settings
- Chapter 4 Network Security, Authentication and Auditing
- 4.1 Fortress Security Settings
- 4.1.1 Operating Mode
- 4.1.2 FIPS Settings
- 4.1.3 MSP Encryption Algorithm
- 4.1.4 Encrypted Data Compression
- 4.1.5 MSP Key Establishment
- 4.1.6 MSP Re-Key Interval
- 4.1.7 Key Beacon Interval
- 4.1.8 Fortress Legacy Devices
- 4.1.9 Encrypted Zone Cleartext Traffic
- 4.1.10 Encrypted Zone Management Settings
- 4.1.11 Authorized Wireless Client Management Settings
- 4.1.12 Turning Mesh Point GUI Access Off and On
- 4.1.13 SSH Access to the Mesh Point CLI
- 4.1.14 Blackout Mode
- 4.1.15 Allow Cached Credentials
- 4.1.16 Fortress Access ID
- 4.2 Digital Certificates
- 4.3 Access Control Entries
- 4.4 Internet Protocol Security
- 4.5 Authentication and Timeouts
- 4.5.1 Authentication Servers
- 4.5.2 Internal Authentication Server
- 4.5.2.1 Basic Internal Authentication Server Settings
- 4.5.2.2 Certificate Authority Settings
- 4.5.2.3 Global User and Device Authentication Settings
- 4.5.2.4 Local 802.1X Authentication Settings
- 4.5.2.5 OCSP Authentication Server Settings
- 4.5.2.6 OCSP Cache Settings and Management
- 4.5.2.7 Internal Authentication Server Access Control Lists
- 4.5.3 User Authentication
- 4.5.4 Client Device Authentication
- 4.5.5 Session Idle Timeouts
- 4.6 ACLs and Cleartext Devices
- 4.7 Remote Audit Logging
- 4.8 Wireless Schedules
- 4.1 Fortress Security Settings
- Chapter 5 System Options, Maintenance and Licensing
- Chapter 6 System and Network Monitoring
- Index
- Glossary
Fortress ES-Series CLI Guide: Networking and Radio Configuration
59
WMM: enable
FragThreshold: off
RtsThreshold: off
DtimPeriod: 1
VlanId: 1
SwitchingMode: access
VlanAllowAll: Y
VlanActiveTable: <none>
Zone: encrypted
UcostOffset: 0
Description:
802.1X/11i Security: none
RateMode: auto
MaxRate: 54
MinRate: 1
McastRate: 1
BssId: 00:14:8c:08:10:91
Except for the final line of output (BssId, which displays the
BSS’s MAC address), if you specify only the radio, each of the
settings shown above can be configured interactively with
add
bss
:
# add bss -radio radio1
BssName (string for identity): bss1.2
Ssid ('random'(randomly generate)|string(32 chars max)): ssid1.2
EnableWds[N] (Y|N to allow peer-to-peer connection): y
MinimumRSS (-95..0 to set minimum receive signal strength when WDS is enabled):
AdminState (enable|disable to set BSS administrative state):
AdvertiseSsid (Y|N to advertise or hide SSID in Beacon frame): n
DropBroadcastProbeReq (Y|N to drop or respond to broadcast Probe Request frame sent with no SSID):
StaIdleTimeout[5] (timeout in minutes before an idle STA is disassociated):
Only11g (Y|N to support only 802.11g):
RateMode (auto|fixed to set bit-rate adaptation mode):
MaxRate (1|2|5.5|11|6|9|12|18|24|36|48|54 to set maximum transmission rate in Mbps):
MinRate (1|2|5.5|11|6|9|12|18|24|36|48|54 to set minimum transmission rate in Mbps):
WMM (enable|disable to set Wi-Fi Multimedia (WMM) support):
FragThreshold (off|256..2345 to set maximum fragment size):
RtsThreshold (off|1..2345 to set minimum packet size for RTS/CTS handshake):
DtimPeriod (DTIM period in beacon intervals):
VlanId (1..4094 to assign the interface to the corresponding VLAN):
SwitchingMode (trunk|access to set VLAN mode):
AllowAll (Y|N to allow all VLANs in trunk interface):
Table (list of active VLAN IDs when allow all is disabled):
Zone (clear|encrypted (default is encrypted)):
UCostOffset (0..4294967295 to set user-defined offset used to compute virtual interface cost):
McastRate (1|2|5.5|11|6|9|12|18|24|36|48|54 to set multicast transmission rate in Mbps):6
EnhancedMcast (Y|N to set enhanced multicast):
BeaconEncrypt (enable|disable to set WDS Beacon Management frame encryption):
WdsMtu (wifi|ether to set mtu size for WDS links):
Description (string of description):
802.1X/11i Security (none|wpa|wpapsk|wpa2|wpa2psk|wpa2mixed|wpa2mixedpsk):
[OK]