User's Manual

Fortress ES-Series CLI Guide: Network Security, Authentication and Auditing
173
Configure audit logging of learned-device activity interactively
in the last four fields of
set audit:
Alternatively, you can execute
set audit non-interactively with
valid switches and arguments in any order and combination:
# set audit -ldwired enable|disable -ldwireless enable|disable -ldencryptedzone enable|disable
-ldclearzone enable|disable
The Mesh Point CLI returns [OK] when settings are
successfully set.
You must be logged on to an
administrator -level account to
configure audit logging (refer to Section 2.2).
4.8 Wireless Schedules
The Mesh Point provides the ability to configure a schedule for
session establishments by wireless clients. The Mesh Point
supports a single wireless schedule which is applied globally
across all configured Access Point (AP) BSSs. When enabled,
wireless clients are restricted to establish a session only on the
specified days within the specified time range (24 hour format).
The time range is applied to all days selected in the schedule.
When disabled, wireless clients are allowed to establish a
session on any day at any time.
View the current wireless schedule with the show command:
> show wifischedule
Wifi Schedule
Admin state: enable
Days: mon,tue,wed,thur,fri
Start time: 08:30
End time: 17:30
Add the wireless schedule with the add command:
# add wifischedule -adminstate <enable/disable> -days <mon,tue,wed,thu,fri,sat,sun>
-startTime <hh:mm> -endTime <hh:mm>
Delete the wireless schedule with the del command:
# del wifischedule
# set audit
Login[enable] (enable|disable to enable or disable auditing of logins):
Security[enable] (enable|disable to enable or disable auditing of security events):
configuration[enable] (enable|disable to enable or disable auditing of configuration events):
GUI[required] (required | prohibited | automatic to enable or disable auditing of events from the GUI):
SSH[required] (required | prohibited | automatic to enable or disable auditing of events from access via SSH):
SNMP[required] (required | prohibited | automatic to enable or disable auditing of events from access via SNMP):
Console[required] (required | prohibited | automatic to enable or disable auditing of events from access via the console):
Wireded[required] (required | prohibited | automatic to enable or disable auditing of events from access via wired interfaces):
Wireless[required] (required | prohibited | automatic to enable or disable auditing of events from access via wireless interfaces):
Clear Zone[required] (required | prohibited | automatic to enable or disable auditing of events from access via the clear zone):
Encrypted Zone[required] (required | prohibited | automatic to enable or disable auditing of events from access via the encrypted zone):
Learned Wired[enable] (enable|disable to enable or disable auditing of learned wired activity):
Learned Wireless[enable] (enable|disable to enable or disable auditing of learned wireless activity):
Learned Encrypted[enable] (enable|disable to enable or disable auditing of learned wireless activity):
Learned Clear[enable] (enable|disable to enable or disable auditing of learned wireless activity):