User's Manual

- 5 -
Step 4. Updating Operating System Patches and TCP Settings
The installation software will now determine if your computer needs any official operating system
patches applied or any TCP configuration settings changed.
Follow the instructions on each screen to complete the upgrading of any patches or TCP settings.
Step 5.Your installation is now complete
The installation has completed. You will be asked to reboot your computer so that any operating
system patches and TCP setting changes can be used.
After the computer has rebooted, press the USB Stick Modem desktop icon and, once the software
application has started, press the Connect button to establish an Internet connection.
TDD Mode
The USB Stick Modem, when searching for a cell, will slowly flash the green indicator. When a cell
has been located the green indicator will remain on (solid) and the network signal strength and quality
will be displayed within the Client Software application as shown below. The Connect button will
become selectable whenever it is possible to attempt a connection. When connected the Client
Software application will minimize to the task bar and the green indicator will flash more rapidly than
when searching for a cell. To disconnect from the network, the Client Software should be restored
from the task bar and the Disconnect button selected.