User's Manual

- 6 -
Additional Information
The no entry icon may be seen in the Signal Quality graph while the modem is searching for a signal.
This behavior is expected.
When only the red LED is lit it may not be possible to open the Client Software application.
Safety and Care Instructions
Before using your USB Stick Modem for the first time, please read and follow all warnings, safety, care,
cleaning and operating instructions on the USB Stick Modem label and in this guide. These guidelines will
help protect your product from potential damage and ensure your personal safety.
Safety Guidelines for the USB Stick Modem
Do not attempt to disassemble the USB Stick Modem; doing so may expose you to unsafe conditions.
The USB Stick Modem does not contain any user serviceable components.
Service should be performed by the Service Provider Service Center only. Contact Service Provider
Customer Service to find the nearest Service Center.
Position the USB Stick Modem so that it is protected from falling objects. Do not allow liquids to spill on
or into the USB Stick Modem.
Do not expose the USB Stick Modem to extreme hot (over 131° F/+55°C) or cold (under 14° F/-10°C)
temperatures.