User's Manual

- 5 -
Step 4. Updating Operating System Patches and TCP Settings
The installation software will now determine if your computer needs any official operating system patches
applied or any TCP configuration settings changed.
Follow the instructions on each screen to complete the upgrading of any patches or TCP settings.
Step 5.Your installation is now complete
The installation has completed. You will be asked to reboot your computer so that any operating system
patches and TCP setting changes can be used.
After the computer has rebooted, press the USB Stick Modem desktop icon and, once the software
application has started, press the Connect button to establish an Internet connection.
TDD Mode
The USB Stick Modem, when searching for a cell, will slowly flash the green light emitting diode
(LED). When a cell has been located the green LED will remain on (solid) and the network signal
strength and quality will be displayed within the Client Software application as shown below. The
Connect button will become selectable whenever it is possible to attempt a connection. When
connected the Client Software application will minimize and the green LED will flash more rapidly
than when searching for a cell. To disconnect from the network, the Client Software should be
restored from the notification bar and the Disconnect button selected.