Integration Guide

OEM PCI Express Mini Module Integration
February 2010 IPWireless Proprietary and Confidential Page 9 of 9
Subject to Non Disclosure Agreement
5 Regulatory Information
5.1 Compliance with FCC Rules and Regulations
The IPWireless PCI Express Mini module is certified against FCC Parts 27 & 90 for operation in the
698-798MHz frequency allocation. The module is certified under FCC ID: PKTPEMAEX and is only
certified for use with external antennas, the maximum antenna gain allowed is 8.6Bi. Please refer to
the FCC Grant of Certification for this device.
If the FCC ID label is not visible from outside of the host device, then an additional label is required on
the outside of the host device stating ‘Contains FCC ID: PKTPEMAEX’
IMPORTANT: Manufacturers of devices containing the IPWireless PCI Express Mini module are
advised to.
1. Clarify any regulatory questions, particularly if the host device contains other radio
transceivers.
2. Have their final product tested and approved for FCC compliance.
3. Include instructions with the final product regarding meeting RF Exposure requirements of the
FCC rules.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not covered in this document must be approved in writing by the
IPWireless. Changes or modifications made without written approval may void the user’s authority to
operate this equipment.
5.2 Exposure to Radio Frequency Signals
To comply with the FCC RF exposure rules, the UE PCI Express Mini module has been evaluated
against the Maximum Permissible Exposure (MPE) limits defined in Section 1.1310 of the FCC rules
for the uncontrolled environment. During normal operation, all persons should maintain a distance of
at least 20cm from the antenna to ensure compliance with the MPE limits.
If after module integration, the user will be less than 20cm from the antennas additional RF exposure
assessment will be required.