User's Manual

P1D Wireless Broadband Modem User Manual
- Page 30 of 46 -
Appendix D – Modem Display Warnings
The Wireless Broadband Modem top panel contains 5 individual LEDs, as shown in Figure 9,
used to indicate various activities on the modem, such as ON/OFF, current signal quality, data
traffic activity and network connection status.
However if the modem experiences certain error conditions the display will be used to signal
the condition back to the user.
Figure 9
Figure 9 shows indicators location and function.
The indicators can signal warning or error scenarios as well as their normal functions and this
section will aid the user in interpreting such a display combinations.
Power-On Self Test Failure
At power-on the Modem will carry out a number of tests to confirm the operational integrity of
various onboard components. If the Traffic activity and right-hand (nearest to On/Off switch)
signal quality indicator are lit together, this indicates a self-test failure.
In this event it is recommended that you switch off the modem and contact your Service
Provider for Technical Support.
Software Upgrade Warning
If all the Modem indicators, in normal operation, flash on and off together then the network is
informing the user that a Modem software upgrade is required.
Please refer to Appendix C for details on performing software upgrades.
On/Off switch with
indicator
Connection status
Signal quality indicators
Traffic activity