User's Manual

P1D Wireless Broadband Modem User Manual
- Page 18 of 46 -
Access Network Parameters - The Connection Software only supports your service provider
as the network operator. This is shown in the drop down list. The other two parameters
shown are the user access name and access password. These parameters are set
automatically during the registration procedure, and the user should have no need to modify
them manually.
Signal Strength - shows the level of the radio signal strength currently achieved by
the P1D Modem.
Unable to transmit or receive due to lack
of signal.
Minimum signal strength required to
transmit and receive data.
Increasing signal strength, allowing
higher data transmit and receive data
rates.
Maximum signal strength. Data will be
transferred at the maximum rate of the
P1D Modem.
Unable to obtain signal from the Modem.
Battery Charge - The P1D Modem comes with an internal battery.
No charge. Wireless Broadband Modem
will only work when powered by the
external AC supply, which will also
charge the battery.
Battery level is very low, and will soon
require the use of the external AC
power supply to continue operating.
Increasing levels of battery charge,
which allow the P1D Modem to operate
for increasing lengths of time, when
battery operated.