User Manual

IPWireless Broadband Modem User Guide
9
Chapter 2 - Getting Started
Required Equipment
To install and use your IPWireless Broadband Modem, you will need an IBM-compatible
computer with the following configuration:
•
Operating System: Windows 98, Windows 2000 or Windows ME
•
CD-ROM drive
•
USB port or RS-232 Serial port
•
A minimum of 10 Mbytes of available disk space on your hard drive
Package Contents
In addition to this User Guide, the following items are included in the IPWireless
Broadband Modem package:
Computer Interface Cable
A USB computer interface cable is included with your IPWireless Broadband Modem.
Use this cable to connect the IPWireless Broadband Modem to your computer. If
needed, refer to your computer manual for the location of a USB port.
If your computer does not have a USB port, an optional RS-232 Serial cable can be
purchased separately from your local electronics store. The serial cable maximum data
rate is 230.4Kbps.
AC Power Adapter
The AC power adapter provides power to the IPWireless Broadband Modem. The power
adapter plugs into a 120V or 240V AC power outlet. The pin end of the power cable
plugs into the power jack located on the side of the IPWireless Broadband Modem. Do
not use any power adapter other than the one provided with your IPWireless Broadband
Modem.
Installation CD
The installation CD includes the IPWireless PC Software, a choice between two Internet
browsers, Adobe Acrobat Reader, and an Adobe PDF version of this guide.
Other Informational Material
Your IPWireless Broadband Modem packaging may contain additional informational
material pertaining to the use or care of the IPWireless Broadband Modem within your
service area. Please review all such information carefully before using the IPWireless
Broadband Modem.