User's Manual

[IPWireless] Broadband Modem User Guide – Draft v.3

10.

Start Copying Files

- The options that you selected during the installation

will display before any files are copied from the installation CD. To confirm

the information click

‘Next’

11.

Copying Files

- All installation options have now been made and the

InstallShield Wizard will copy the necessary files to your computer.

12.

Completing the Installation

- The software has now been copied to your

PC. The installation will proceed with [IPWireless] Broadband Modem

detection, configuration, and user registration. Click

‘Next’

to view the

‘Readme.txt’

. Click the Windows close icon (x) in the upper right

corner of

the screen to close the

‘Readme.txt’

and continue with the next step to copy

the modem driver files.

Copying the Modem Driver Files

The installation will now copy the necessary modem driver files to your computer,

so that your PC will detect the [IPWireless] Broadband Modem when you install the

computer interface cable. A number of information boxes will display, indicating the

progress of the modem driver installation. The final information box will prompt you

to connect the computer interface cable to the [IPWireless] Broadband Modem and

your computer.

USB Cable Connection

If you are connecting via a USB cable, your computer operating system should

detect that new hardware has been added and automatically plug and play the

modem device. The plug and play function adds the [IPWireless] Broadband

Modem to your PC and may take approximately 1 minute to complete. During this

time, a number of plug and play messages will display confirming that new

hardware has been found and that the software for the [IPWireless] Broadband

Modem is being detected. After the plug and play is finished, click the

‘OK’

button

and connect the USB Cable.

1. Plug the 20-pin connector on the USB cable into the PC port on the side of

the modem as shown in Figure 7 below.

Connect the other end of the USB cable into a USB port on your computer. If

needed, refer to your computer manual for the location of the USB port.