User's Manual

[IPWireless] Broadband Modem User Guide – Draft v.3
17
5. Observe the five signal indicators (rings) on the inner center of the
[IPWireless] Broadband Modem display to help you determine when the
[IPWireless] Broadband Modem has located a radio signal. Adjust the
position of the [IPWireless] Broadband Modem until the center ring is
illuminated. This is similar to moving an FM radio to receive the best sound
quality. When the center ring (or dot) is illuminated, you have the minimum
signal strength required to transmit and receive data. Each subsequent ring
indicates increasing signal strength. When all five rings are illuminated, you
can transfer data at the maximum speed of the [IPWireless] Broadband
Modem, or at the service level you selected. See Figure 4 below.
Figure 4
3. Continue to adjust the position of the [IPWireless] Broadband Modem to
achieve the strongest radio signal possible from your location.
Tip:
Placing
the [IPWireless] Broadband Modem near a window can boost the signal
strength.
4. If only one or two signal strength indicators illuminate, refer to the
troubleshooting section in Appendix A.
5.
You are now ready to install the [IPWireless] PC Software.
Note:
Install the
[IPWireless] PC Software before connecting the Computer Interface Cable.
Install the [IPWireless] PC Software
The CD contains the applications listed below:
o [IPWireless] PC Software
o Adobe Acrobat Reader
o Microsoft Internet Explorer 5
Center Ring (or dot)